High Power Output for Exceptional Reach And Performance
Available in 50 W or 100 W options the VXR-9000 delivers the reliable performance and extended range needed. The slim-line design is crafted for easy installation and integration into most repeater sites.
Large Channel Capacity With Priority Scan
The VXR-9000 may be programmed with up to 32 channels over a wide frequency range and can perform in repeater or base station mode, depending on the application. Includes Priority Channel scanning capability for efficient communications monitoring.
Power Supply Backup with Alert
Should DC power fail at the repeater site, the VXR-9000 will automatically revert to a backup DC power source, if connected. Under backup DC power, the repeater will transmit an alert message to notify the operator that immediate attention is required at the repeater site.
Flexible, Automatic Command Sequence Configuration
The VXR-9000 may be programmed to perform a five-step sequence of commands for certain operating events. For example, during a DC power failure and the repeater switches to a backup power supply, the repeater can be programmed to switch to low power and send a CW ID advising of the situation, etc.
Designed for High Reliability
The cooling fan diameter is 3+ inches and thermostatically controlled to ensure a stable temperature environment for the VXR-9000. Fan operation may be programmed for three options: off, continuous or temperature-controlled, depending on the application. A malfunction alarm is also included.
Simplex / Duplex Capability
The VXR-9000 is designed for simplex mode with single-antenna operation or full-duplex mode with the optional VXD-60 duplexer when optimal communications is necessary at all times.
VERTEX STANDARD VXR-9000 SERIES REPEATER FEATURES:
- 32 Channels
- 6 Dual Functioning Programmable Front Panel Keys
- 50W or 25W Power Output
- 100W Power Amplifier Unit (Optional)
- PLL Step Sizes: 2.5/5.0/6.25 kHz
- Low Level and High Level Encryption Options
- CTCSS Reverse Burst with Programmable Length
- 3.15" Square Cooling Fan with "Malfunction" Sensor Output
- Multi-Tone Decode
- 5-Step Command Sequence for Startup, Power Source: Main to Sub, and Sub to Main
- CW ID and CW Messages Selected by Trigger
- Coaxial relay Drivers for Single Antenna Operation; Also TX Attenuator
- Programmed Message Banks for Maintenance Logs or Any Other Free Text
- Repeater Occupation Settings to Hold the Last Tone Code (Preset Timer)
- Built In Audio Voice Companding Unit
- Channel Scanning With Priority Channel
- Automatic DC Backup Switching with Alert
- Optional Built In Power Supply Unit FP-31
VERTEX STANDARD VXR-9000 PACKAGES
The Vertex Standard VXR-9000 Series Repeaters are available in the following VHF and UHF packages:
VXR-9000 Rack Mount FM Repeaters 100W (50W Continuous)
VHF
VXR-9000VC 100W PKG-1 148-174 MHz, 32 Channel, 100 Watt
UHF
VXR-9000UD 100W PKG-1 450-490 MHz, 32 Channel, 100 Watt
VXR-9000 Rack Mount FM Repeaters 50W (25W Continuous)
VHF
VXR-9000UA PKG-1 134-160 MHz, 32 Channel, 50 Watt
VXR-9000UD PKG-1 148-174 MHz, 32 Channel, 50 Watt
UHF
VXR-9000VA PKG-1 400-430 MHz, 32 Channel, 50 Watt
VXR-9000VC PKG-1 450-490 MHz, 32 Channel, 50 Watt
DOWNLOADS:
Click here to view the Vertex Standard VXR-9000 Series Repeater Spec Sheet
Click here to view the Vertex Standard VXR-9000 Owner’s Manual
|
